Entry Section (2 Puzzles)
Q: How do I remove the panel blocking the door upon entering the facility?
A: You must pick up a safety wrench from the shelves on the left, then use the safety wrench on the red bolts of the panel.
Q: What is the puzzle to turn on the main facility lights?
A: You need to touch several highlighted nodes to activate the lights.
--------------------------------------------------------------------------------
Power Supply Section (6 Puzzles)
Q: How do I set the Symbol Switch Console on the central platform?
A: You need to flip switches corresponding to the symbols that appear on the walls at the marked locations.
Q: What is the code required to program the red keycard for the Power Supply Room?
A: Insert the red keycard and enter the code 8510, then press the bottom-left button.
Q: Which Energy Tubes must be inserted into the main control panel to achieve the required total charge of 36?
A: First, determine the charge values using the conductivity scanner: Pink (3), Green (8), Blue (25), Orange (10), Red (2). Then, insert the pink, green and blue energy tubes (3 + 8 + 25 = 36).
Q: How is the Light Activation Grid puzzle solved (activating the correct number of lights in each row)?
A: Back out from the control panel and locate the 4 square panels on the walls; press the specific red buttons that are highlighted on those panels.
Q: How are the 6 Cable Switches in the top-right section of the control panel set correctly?
A: Follow the cable from each switch to its attached device and set the switch based on whether that device is powered on or off.
Q: What is the final action needed to restore the power supply?
A: After setting the 6 switches, pull the small lever in the top-right section. Once the next panel opens to the right, pull the red handle inside.
--------------------------------------------------------------------------------
Pressurization Section (6 Puzzles)
Q: What is the code required to program the blue keycard for the Compressor Room?
A: Insert the blue keycard and enter the code 0415, then press the bottom-left button.
Q: How do you identify the model of the compressor in the room?
A: Observe the physical components (3 Cylinders, Circle Gauge, ROD-TRC Connecting Rods) and use the Operations Manual. By checking the manometer gauge while moving the slider into the red, yellow, and green zones, the model is confirmed to be GD-15 IRIS.
Q: Which Drive Module (DM) must be inserted into the main compressor controls?
A: Based on the GD-15 IRIS model, the required module is DM2. Insert the brown Transmission Module 2.
Q: What is the required Coolant Level to submit to the cooling system controls?
A: Based on the GD-15 IRIS model, the required coolant level is 9L.
Q: How do you adjust the Electrical Circuit Adjustment Unit on the wall?
A: Set the numbers according to Pattern 2 found in the manual: 3 5 2 5 4 1 3 5. Then press the red button.
Q: How do you power up the compressor using the dials?
A: Turn the red dial until all lights are active. Then, turn each of the black dials beneath it until all lights are active. Finally, press the red button.
--------------------------------------------------------------------------------
Reactor Access Section (6 Puzzles)
Q: What are the three codes needed to authorize the Central Console (INIT, AUTH, EXEC)?
A: The three codes are:
• INIT: 7086 (found on the wall in the main room).
• AUTH: 0649 (found on the fan stopped in the power supply room).
• EXEC: 4023 (found on the right console screen in the main room).
Q: How do you enter the code BLACKOUT without blacking out adjacent required letters?
A: Carefully select the 8 letters that spell B L A C K O U T, ensuring that each selection avoids blacking out 3 adjacent letters that are needed for the sequence.
Q: How do you pass the series of 6 randomized Security Tests?
A: You must successfully complete 6 tests which include: Motion Detection Scan (remain still), Randomized Beam Detector (avoid fixed lasers), and Weight Detection Plates (stand on a pressure plate that is not listed as being active).
Q: What is the correct sequence of doors needed to navigate the Reactor Chamber Maze and restore coolant flow?
A: Use the switches to open the doors in this specific sequence: blue, then red, and then blue again. Then use the manual release at the end.
Q: How are the 7 coolant rods placed correctly?
A: Use the controls to position the coolant rods so that the letters on the rods match the letters on the slots.
Q: How do you calibrate the Vertical Calibration System?
A: Use the controls on the left to rotate the whole device, and then slide the 4 visible pistons up or down until all four of them display green.
--------------------------------------------------------------------------------
Evacuation Section (1 Puzzle)
Q: After pushing the 'SAVE THE WORLD' button, what is the final console puzzle required to complete the evacuation within the 3-minute time limit?
A: The console shows a Roman numeral with a highlighted corner. Find the matching plaque in the reactor chamber and enter the corresponding symbol on the console. This process must be repeated 3 more times (4 matches total).
Comments
Post a Comment